Saturday, April 23, 2022

Pond Chemistry

My pond test kit came in the mail. This is turning into a fun chemistry exploration. The first thing I noticed was that my pond water sample is actually pretty clear. The green hue must be algae on the pool surfaces. By adding a few drops and comparing the water to the color strips, I can figure out what my pond needs to be healthy.

pH is the measure of acidity or alkalinity of water. Some plants like slightly acidic water and fish tend to like slightly alkaline water. So the best range is 6.8 to 8.0.

Ammonia is a toxic waste that comes from fish, birds, other pond life, and decomposing plants. My trees drop A LOT of debris into the pond. When ammonia gets too high, it's time to clean out the filters, reduce fish feeding, and make sure there's adequate oxygenation of the water.

A natural process called the biological filter controls the ammonia levels. Nitrifying bacteria use ammonia as a food source then turn it into nitrites and eventually into nitrates. So if nitrites are too high, then that means the pond is overstocked with fish, or too much fish food is sinking to the bottom without getting eaten, or there is too much decaying organic matter.

Phosphates come from fish poop and decaying organic matter such as dead algae and uneaten fish food. Plants need phosphate to grow. So if phosphate levels are too high, then we can add more plants to use up the extra phosphate.

So here is my first pond water sampling:
Desirable Range6.8-8.20
00
DATEpHAmmoniaNitritePhosphate
4/23/202280.2501

What does my pond need? Tell me in the comments below.




1 comment:

  1. I don't fully understand this but what if you tried cutting your trees so stuff doesn't get in your pond. Try not adding so much fish food so your phosphate levels go down.

    ReplyDelete